A brick exterior specification page describes the documented finish coverage for each elevation, with separate records for brick, mortar and trim selections. It distinguishes intended appearance from installed work. Use the approved elevation and detail references to explain coverage, and keep structural wall descriptions tied to their own records.
Where does the brick finish apply?
Start with the buyer's location question: which parts of this home have the brick finish described? Name the elevation and its coverage zones. A front view cannot establish side or rear coverage. Avoid an unqualified whole-home description when the record supports only a porch wall or front field.
Match each zone to the applicable elevation revision and detail reference. Use the area's existing drawing label when one exists. If the drawing label needs explanation, add a plain location description. Keep the original reference in your internal schedule so the reviewer can find the same area.
Read adjoining views before writing about a corner. A finish shown on one face does not establish where it ends beyond that view. When the coverage boundary remains unclear, ask the project reviewer to identify it. Do not fill the gap by extending a texture from the rendering.
The exterior siding page guide explains how to organize several finish categories across an elevation. A brick page needs a closer coverage record. It should tell buyers which named zones the brick description covers and which adjoining areas need a separate explanation.
Keep observed appearance separate from assembly identity. A photograph can show a patterned surface without identifying the structural wall behind it. Do not label the wall system from that appearance. If you need a wall-system description, obtain the applicable wall records and responsible review separately.
How should incomplete elevations appear?
If only the front coverage is confirmed, narrow the page to that elevation. State that the other elevations are not described in the current summary. An empty side-elevation row means unresolved scope. It does not mean no brick, full brick or the same finish as the front.
Give buyers a useful next question: which approved elevation describes the side they want to compare? Keep that question near the relevant view. A broad note elsewhere on the website cannot explain the boundary of a specific finish claim.
Which selections need separate records?
Record the brick selection, mortar selection and trim selection independently. One approved choice should not silently approve the others. If the brick record is current and the mortar selection remains open, write a sentence that preserves both states. Do not describe the exterior palette as final.
Use the selection terminology your team already maintains. Distinguish a project selection from an option and from a confirmed current inclusion. The standard specifications page guide sets out those scope categories. A photographed project does not establish a builder-wide brick standard.
Keep exact product identity in the supporting record when confirmed. If you publish a generic brick finish description, do not add an unverified material subtype. A color name, rendered texture or sample image cannot replace the applicable product record. Leave unsupported product attributes out of the public paragraph.
Record trim wherever it defines the edge of the described zone. Identify the transition detail that governs the boundary in the project records. This reference locates the description for review. It does not give buyers a construction instruction or establish that a transition was installed as drawn.
The following comparison is an editorial method for separating statements. It is not an official specification classification.
| Record | What it can support | What remains separate |
|---|---|---|
| Approved elevation | Named brick coverage zones in that view | Coverage outside the documented view |
| Brick selection | The recorded selection and its approval status | Mortar and trim choices |
| Mortar selection | The documented mortar choice for the named zone | Unrecorded product or performance attributes |
| Transition detail | The reference governing a documented finish boundary | Proof of completed installation |
| Structural wall record | A separately reviewed wall-system description | Conclusions inferred from brick appearance |
When two records disagree, hold the affected sentence. Ask which revision and selection apply together. Do not combine the latest elevation with an older palette merely because both files look complete. Buyers need the current relationship between scope and selection.
How do you complete a brick finish schedule?
Copy this worksheet for each coverage zone. It is an original editorial proposal for preparing website copy, not a construction schedule. Keep private drawing identifiers and selection documents in your controlled project records. Publish a readable summary only after the relevant reviewer confirms its scope.
Brick finish schedule Elevation: Coverage zone: Product record: Mortar record: Transition detail: Image status: Scope exclusion:
Use the elevation field for the view and applicable revision. Use the coverage zone for a location the reviewer can identify. In the product and mortar fields, record both the source reference and selection status. An unresolved selection should remain visible in the working schedule.
Use the transition field to point to the approved boundary reference. Use image status to distinguish rendering, selection sample and installed photograph. In scope exclusion, state what this row cannot establish. Examples include rear-elevation coverage, structural wall identity or a selection still awaiting review.
- Identify the current elevation and each brick coverage zone.
- Connect each zone to its brick and mortar selection records.
- Record adjoining trim and the applicable transition detail.
- Label each image by type, view and documented project status.
- List unresolved selections and coverage outside the described zone.
- Draft the public sentence from the confirmed fields.
- Ask the responsible reviewer to compare the sentence with the records.
What does a fictional completed row show?
This example is fictional and describes no actual builder, home or AgAI Labs construction work. Suppose the approved front elevation identifies brick at a porch wall. The brick selection is approved, the mortar selection remains open, and the side-elevation finish remains unresolved. A rendering shows the proposed front appearance.
The schedule names the front porch wall as its coverage zone. It records the approved brick selection and the open mortar selection separately. The transition field points to the fictional porch boundary detail. Image status reads rendering. Scope exclusions name the side elevation and structural wall description.
A fictional public-page excerpt could read: “The front-elevation rendering illustrates the recorded brick finish at the porch wall. The brick selection is approved; the mortar selection remains under review. This image shows design intent. Side-elevation coverage and structural wall information are outside this finish summary.”
Do not copy that excerpt onto a real project without replacing its facts. If your actual records establish a different zone or status, write that narrower description. A useful worksheet captures the distinction rather than supplying attractive default wording.
How should renderings and installed close views differ?
Give each image a caption that states what the image contributes. A rendering illustrates intended appearance. An installed close view shows a limited photographed area. Neither caption should describe every elevation unless separate records establish that coverage.
For the fictional rendering above, a caption could read: “Front porch rendering illustrating the approved brick selection; mortar selection remains open.” That wording identifies both intent and an unresolved choice. It does not present the rendering as a completed exterior.
For a separate fictional installed view, assume the reviewer has confirmed the photographed location and applicable selection records. Its caption could read: “Installed brick finish at the front porch wall, shown in a close view. This frame does not show other elevations.” The caption makes no structural or performance assertion.
Do not replace a rendering caption with the installed caption while leaving the rendering in place. Check the file, caption and source reference as one item. If the installed photograph shows an earlier selection, preserve that history instead of calling the image a current option.
The W3C informative images tutorial explains that text alternatives communicate an image's information according to its purpose. Write alternative text for the useful visible information. Keep rendering status and unresolved selections in visible captions where every reader can find them.
Image guidance establishes no project facts. Use your own confirmed records for location and selections. Do not add fire resistance, maintenance savings or structural performance to either caption. Those conclusions are outside this finish description.
What belongs in the public finish description?
Lead with the named coverage zone, documented finish and selection status. Add the image type when a view accompanies the description. Keep the scope limit beside that statement. Buyers should not need to compare a gallery caption with a distant specifications note to understand the same area.
The Federal Trade Commission's truth-in-advertising guidance says advertising must be truthful and not misleading. It also addresses scientific evidence when appropriate. Apply that principle to the claims you choose to publish. The proposed schedule does not establish regulatory compliance or endorse a particular assembly.
When a buyer asks about concealed layers, keep the answer separate from the finish paragraph. The exterior insulation page guide explains how assembly records support a concealed-layer description. A brick coverage row does not settle those questions.
During the Owned website stage, connect the approved finish summary with its project and specification pages. The custom builder website pages guide explains that wider page set. Use the builder websites library for related page decisions.
When a selection changes, review the affected zone and its captions together. Keep completed-project descriptions tied to what their records establish. A new project choice should not rewrite older photographed work or become a claim about every home you build.
What else should a brick exterior page answer?
Does a brick exterior description identify the structural wall?
A brick finish description does not identify the structural wall from appearance alone. Use the applicable wall-system records and qualified review for a structural description. Keep finish coverage and structural scope separate on the public page.
Can a front photograph establish brick on every elevation?
A front photograph cannot establish brick coverage on unseen elevations. Map each elevation to its approved finish record. Limit the public description to the zones those records confirm, and leave unresolved side or rear coverage unspecified.
What if the brick is approved but mortar is undecided?
State the brick selection and mortar selection statuses separately on the brick exterior page. An approved brick record does not resolve an open mortar choice. Label the unresolved selection beside the affected description or rendering.
Can a completed brick project become the standard specification?
A completed project's brick finish remains a project example unless the current applicable specification confirms it as an inclusion. Check the current scope record before using standard wording. A photograph alone cannot establish that inclusion.